Features
- Custom XGS-PON SFP+ Stick Module, Support 8311 community firmware and BFW solutions firmware, you can do it by myself.
- High performance with 1 GB of RAM
- Widely used in US/CA/UK telecom service providers, such as AT&T
- Support modify
-
Support XGS-PON/XGPON network solution
- Single fiber bi-directional data links symmetric TX953 Gb/s / RX 9.953 Gb/s with MAC function
- SFP package with SC APC/UPC receptacle
- Single 3.3 V power supply
- Hot-pluggable capability
- High power 1270 nm DML DFB LD and high sensitivity 1577 nm APD
- Support 20 km transmission distance with SMF
- CML compatible data input/output interface
- Low power dissipation < 3 W
- Low EMI and excellent ESD protection
- Digital diagnostic monitor interface
- RoHS-6 compliance
- Case temperature range: Commercial: 0 °C to 70 °C
- 256 GEM/XGEM ports, 64 T-CONTs or 16 LLIDs
- Carrier Grade QoS Engine
- Advanced loopback and diagnostic capabilities
- Supports Synchronous Ethernet (SyncE)
Applications
- Residential home gateway
- Network switch/router, VDSL MDU, and G.fast DPU
- Mobile backhaul
Standard
- Complies with ITU-T G.987.2
- Complies with ITU-T G.9807.1, G.9807.2
- ITU-T G.988 OMCI L2 MAC Bridge (Up to 64 L2 bridges)
- 8275/Y.1369/IEEE 1588v2
- IEEE 802.1ag and ITU-T Y.1731 Ethernet OAM delay & loss measurement hardware support
| Product Name | XGSPON STICK ONU SFP+ Transceiver |
| Brand | LuLeey |
| Model | LL-xs1025 |
| Chips | MaxLinear PRX300/PRX126 |
| RAM | 1G |
| Absolute Maximum Ratings | |||||
| Parameter | Symbol | Min. | Max. | Unit | Note |
| Storage Ambient Temperature | TSTG | -40 | 85 | °C | |
| Operating Humidity | OH | 5 | 95 | % | |
| Supply Voltage | Vcc | 0 | 3.6 | V | |
| Recommended Operating Conditions | ||||||
| Parameter | Symbol | Min. | Typ. | Max. | Unit | Note |
| Operating Case Temperature | Tc | 0 | 70 | °C | Commercial | |
| -40 | 85 | °C | Industrial | |||
| Power Supply Voltage | Vcc | 3.13 | 3.3 | 3.47 | V | |
| Power Supply Current | Icc | 1200 | mA | |||
| Nominal Upstream Line Rate | 9.953 | Gb/s | ||||
| Nominal Downstream Line Rate | 9.953 | Gb/s | ||||
| Transmitter Optical Characteristics | ||||||
| Parameter | Symbol | Min. | Typ. | Max. | Unit | Note |
| Average Launch Optical Power | Pout | 4 | 9 | dBm | ||
| Power-OFF Transmitter Optical | Poff | -45 | dBm | |||
| Extinction Ratio | ER | 6 | dB | |||
| Centre Wavelength | lc | 1260 | 1270 | 1280 | nm | |
| Spectral Width (-20 dB) | Dl | 1 | nm | |||
| Side Mode Suppression Mode | SMSR | 30 | dB | |||
| Eye Diagram | Compliant With802.3av | |||||
| Transmitter Electrical Characteristics | ||||||
| Parameter | Symbol | Min. | Typ. | Max. | Unit | Note |
| Input Differential Impedance | ZIN | 90 | 100 | 110 | Ω | |
| Data Input Swing Differential | VIN | 200 | 1000 | mV | ||
| Burst Disable | 2.0 | Vcc | V | |||
| Burst Enable | 0 | 0.8 | V | |||
| Tx-Fault Voltage – Low | 0 | 0.8 | V | |||
| Tx-Fault Voltage – HIGH | 2.0 | Vcc | V | |||
| Receiver Characteristics | ||||||
| Parameter | Symbol | Min. | Typ. | Max. | Unit | Note |
| Optical Center Wavelength | lc | 1575 | 1577 | 1580 | nm | |
| Sensitivity | SEN | -29 | dBm | |||
| Receiver Overload | OL | -9 | dBm | |||
| LOS Assert | SDA | -40 | dBm | |||
| LOS De-Assert | SDD | -29 | dBm | |||
| LOS Hysteresis | 0.5 | 5 | dB | |||
| Data Output Swing Differential | Vout | 300 | 1200 | mV | ||
| LOS | High | 2.0 | Vcc | V | ||
| Low | 0 | 0.8 | V | |||
| Pin Description | |||
| 1 | VeeT | Module Transmitter Ground | Host pull-up 4.7 KΩ – 10 KΩ |
| 2 | Tx_Fault | Module Transmitter Fault | Low = normal, High = abnormal,
Host pull-up 4.7 KΩ– 10 KΩ |
| 3 | Tx-Disable | Transmitter Disable; turns off transmitter laser | |
| 4 | Mod-Def(2) | SDAI2C Data line | 2 wire serial ID interface, SDA,
Host pull-up 4.7 KΩ– 10 KΩ |
| 5 | Mod-Def(1) | SCLI2C Clock line | 2 wire serial ID interface, SCL,
Host pull-up 4.7 KΩ– 10 KΩ |
| 6 | Mod-Def(0) | Module Absent, connected to VeeR | Connected to VeeT or VeeR in the module,
Host pull-up 4.7 KΩ – 10 KΩ |
| 7 | Rate Select | For Dying Gasp detect, input low active | |
| 8 | LOS | Loss of Signal | High = loss of signal, Low = normal operation,
Host pull-up 4.7 KΩ – 10 KΩ |
| 9 | VeeR | Module Receiver Ground | |
| 10 | VeeR | Module Receiver Ground | |
| 11 | VeeR | Module Receiver Ground | |
| 12 | RD- | Inverted Received Data Out | Internally AC-coupled |
| 13 | RD+ | Non-inverted Received Data Out | Internally AC-coupled |
| 14 | VeeR | Module Receiver Ground | |
| 15 | VccR | Module Receiver 3.3 V Supply | |
| 16 | VccT | Module Transmitter 3.3 V Supply | |
| 17 | VeeT | Module Transmitter Ground | |
| 18 | TD+ | Non-Inverted Transmit Data in | Internally AC-coupled |
| 19 | TD- | Inverted Transmit Data in | Internally AC-coupled |
| 20 | VeeT | Module Transmitter Ground | |
| Pin-out Drawing |
 |
| Package Outline |
 Â |
| EEPROM Block Diagram |
 Â |
| Digital Diagnostic Monitoring Interface | ||||
| Parameter | Range | Accuracy | Calibration | Notes |
| Temperature | 0 to 70 °C | ±3 °C | Internal | Commercial |
| Voltage | 3 to 3.6 V | ±3% | Internal | |
| Bias Current | 0 to 131 mA | ±10% | Internal | |
| TX Power | 4 to 9 dBm | ±3 dB | Internal | |
| RX Power monitor | -29 to -9 dBm | ±3 dB | Internal | |
| Ordering Information | |||||
| Part No. | Package | Data Rate | Reach | Wavelength | Temp. |
| XGSPON STICK | SFP+ | TX: 9.953 Gb/s
RX: 9.953 Gb/s |
20 km | TX: 1270 nm
RX: 1577 nm |
0 to 70 °C |
| Warnings |
|
Reviews
There are no reviews yet