Manual

amazing 2.5G xpon stick gpon sfp onu LL-XS2510

This is an operation guide about xpon stick LL-XS2510/dfp-34x-2c2 with RTL960x chip.

The terminal devices Stick are designed for fulfilling FTTH and triple play service demand of fixed network operators or cable operators.These boxes are based on the mature GPON/EPON technology,which have high ratio of performance to price,and the technology of 802.11n Wi-Fi,Layer 2/3.They are highly reliable and easy to maintain,with guaranteed QoS for different service.And they are fully compliant with technical regulations such as ITU-T G.984 .

Compatible with multiple devices

XPON STICK is an ONU with SFP interface, small and exquisite, plug and play, with good heat dissipation and shielding effects. Hot-swappable to work in the SFP slots of switches, cameras and other equipment, so that the whole machine can be directly connected to the GPON or EPON optical network, which can replace the external ONU and improve system integration Spend.

Custom parameters

Support MAC/SN/LOID Modify,You can copy the content from the old ONU to the new one through the web management.

Prepare for login the Stick web management

Before you login the Stick,you should confirm the connect between the Stick and your PC is normal.
Step 1 Configuring the IP address of your PC to 192.168.1.x(2~254) subnet mask is 255.255.255.0
Step 2 Ping IP address of the Stick (Default address is 192.168.1.1).If the PC can get right reply from Ping command,it is mean the connecting between the PC and Stick is normal.

Login Stick

Step 1 Open the explore browser and input the IP address:http://192.168.1.1.
(Stick default IP)
Step 2 You need the user name and password for login.The default username and password are on the label of the Stick bottom.Default administrator user name and password is “admin” and “admin
( choose the login language here)

Device Status

This page shows the current status and some basic settings of the device ,such as CPU Usage, Memory Usage, IP address,…

PON Status

This page shows the current system status of PON .

LAN Interface Settings

This page is used to configure the LAN interface of your Device. Here you may change the setting for IP addresses, subnet mask, etc..

Settings

This page is used to configure the parameters for your network access.
You can input some information from your old device, such as LOID/SN/MAC…

VLAN Settings

This page is used to configure VLAN settings of your Device.

Commit and Reboot

This page is used to commit changes to system memory and reboot your system.

Reboot Time

It will reboot,After runing the setting of time!

Backup and Restore Settings

This page allows you to backup current settings to a file or restore the settings from the file which was saved previously. Besides, you could reset the current settings to factory default.

Info Box

This page is used to set the account to access the web server of your Device. Empty user name and password will disable the protection.

Luleey 2.5G XPON Stick , SFP ONU

Leave a Reply